Sockolet - Reducing and Flat, ANSI Class 3000, FCS (in)

on . Posted in O'let Datasheets

  • Class 3000 - for use with Sch. 80 pipe.
  • Dimensions and tolerances in accordance with ANSI/ASME B16.11 and MSS SP-97.
  • Specifications for carbon steel forgings in accordance with ASTM A105.
  • This is a socket connection used for making 90 degree branching from the main run of pipe.
  • Flat sockolets are used on welding caps, elliptical heads and flat surfaces.
  • Each outlet size is available to fit any run curvature.
  • Outlet combinations fit a number of run pipe sizes, and fittings are marked accordingly.

data 10 sol 2data 10 sol 1data 10 sol

Outlet Size (NPS)ABCDEApprox. Weight (lb)
1/8 3/4 1 5/8 0.269 9/32 0.10
1/4 3/4 1 5/8 0.364 9/32 0.10
3/8 13/16 1 1/4 3/4 0.493 7/16 0.20
1/2 1 1 13/32 29/32 0.622 9/16 0.30
3/4 1 1/16 1 23/32 1 5/32 0.824 9/16 0.35
1 1 5/16 2 1 7/16 1.049 25/32 0.60
1 1/4 1 5/16 2 9/16 1 3/4 1.380 3/4 0.85
1 1/2 1 3/8 2 27/32 2 1.610 3/4 1.00
2 1 1/2 3 15/32 2 9/16 2.067 13/16 1.60
2 1/2 1 9/16 4 1/16 3 2.469 3/4 2.75
3 1 3/4 4 13/16 3 11/16 3.068 15/16 3.80
3 1/2 2 1/8 5 7/32 4 3.548 1 4.30
4 1 7/8 5 31/32 4 3/4 4.026 1 1/16 7.25
5 2 5/8 7 5/16 5 9/16 5.047 1 11/32 12.00
6 2 3/4 8 5/8 6 11/16 6.065 1 13/32 14.50