Tee - Straight, Buttweld, ANSI, WCS (mm)

Written by Jerry Ratzlaff. Posted in Buttweld Fitting Datasheets

Tee - Straight, Buttweld, ANSI, WCS Datasheet

  • A straight tee and cross have the same branch size as pipe. These are used for making 90° branching from the main run of pipe.
  • Dimensions are shown in millimeters per ANSI/ASME B16.9.

data tee bwdata tee bw1

Pipe Size Outside Diameter at Bevel Approx. Weight  
NPSDNStdXSXXS
  mmmmkgkgkg
1/2 15 21.3 25 0.9 1.1 -
3/4 20 26.7 29 1.1 1.3 -
1 25 33.4 38 1.8 2.0 2.9
1 1/4 32 42.2 48 2.9 3.5 5.5
1 1/2 40 48.3 57 4.4 5.1 7.5
2 50 60.3 64 7.7 8.8 13.9
2 1/2 65 73 76 13.2 15.4 23.1
3 80 88.9 86 15.4 18.7 29.8
3 1/2 90 101.6 95 19.8 26.5 39.7
4 100 114.3 105 26.5 34.8 55.1
5 125 141.3 124 46.3 57.3 88.2
6 150 168.3 143 75.0 88.2 149.9
8 200 219.1 178 121.3 165.3 264.6
10 250 273 216 187.4 231.5 -
12 300 323.8 254 264.6 352.7 -
14 350 355.6 279 363.8 529.1 -
16 400 406.4 305 429.9 617.3 -
18 450 457 343 549.0 731.9 -
20 500 508 381 754.0 1,058.2 -
22 550 559 419 912.7 1,212.5 -
24 600 610 342 1,164.0 1,344.8 -
26 650 660 495 - - -
28 700 711 521 - - -
30 750 762 559 - - -
32 800 813 597 - - -
34 850 864 635 - - -
36 900 914 673 - - -
38 950 965 711 - - -
40 1000 1016 749 - - -
42 1050 1067 762 - - -
44 1100 1118 813 - - -
46 1150 1168 851 - - -
48 1200 1219 889 - - -

Tags: Metric Buttweld Fitting Tee