Mechanical Joint 11 1/4 Bends - Full Body, AWWA C110, DI (in)

on . Posted in Ductile Iron Flanged Fitting Datasheets

  • For flange dimensions see Flange - ANSI Class 125, C110, DI
  • AWWA C110/A21.10 - Ductile-Iron and Gray-Iron Fittings (3" to 48")
  • ASME B16.1 - Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • AWWA C104/A21.4 - Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • AWWA C111/A21.11 - Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • Ductile iron mechanical joint fittings 3" through 24" shall be rated for 350 PSI working pressure.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
  • MJ - mechanical joint
  • PE - plain end
  • FLG - flange

mj bend 11 1 dimechanical joint by mechanical joint

mj bend 11 3 dimechanical joint by plain end

mj bend 11 2 dimechanical joint by flanged

 

 

 

 

 

 

 

 

 

 

Pipe SizeDimension (in)Approx. Weight (lb)
RCDMJ x MJMJ x PEMJ x FLG
3 15.25 3.0 11.0 30 - -
4 20.31 4.0 12.0 52 - -
6 30.50 5.0 13.0 65 71 -
8 35.50 5.5 13.5 104 105 -
10 45.69 6.5 14.5 171 - -
12 55.81 7.5 15.5 221 215 -
14 50.75 7.5 15.5 305 - -
16 55.81 8.0 16.0 391 367 -
18 60.94 8.5 16.5 525 422 -
20 71.06 9.5 17.5 605 - -
24 76.12 11.0 19.0 996 800 972
30 116.75 15.0 23.0 1410 - 1305
36 147.25 18.0 26.0 2397 - 2185
42 177.69 21.0 - 3035 - -
48 208.12 24.0 - 4190 - -