Weldolet - Reducing and Flat, ANSI Sch STD, FCS (in)

Written by Matt Milbury. Posted in O'let Datasheets

Weldolet, Reducing and Flat, ANSI Sch STD, FCS Datasheet

  • Dimensions and tolerances in accordance with ANSI/ASME B16.9, ANSI/ASME B16.25 and MSS SP-97.
  • Specifications for carbon steel forgings in accordance with ASTM A105.
  • This is a buttweld connection used for making 90 degree branching from the main run of pipe.
  • Flat Weldolets are used on welding caps, elliptical heads and flat surfaces.
  • Each outlet size is available to fit any run curvature.
  • Outlet combinations 6" and less fit a number of run pipe sizes, and fittings are marked accordingly.
  • For dimension L1, see center of run to face of fitting.

data 3 wol red L1data 3 wol red L2data 1 wol

 

Outlet Size (NPS)ABCApprox. Weight (lb)
1/8 5/8 1 5/8 0.10
1/4 5/8 1 5/8 0.10
3/8 3/4 1 1/4 3/4 0.15
1/2 3/4 1 3/8 15/16 0.20
3/4 7/8 1 3/4 1 3/16 0.25
1 1 1/16 2 1/8 1 7/16 0.50
1 1/4 1 1/4 2 9/16 1 3/4 0.80
1 1/2 1 5/16 2 7/8 2 1.00
2 1 1/2 3 1/2 2 9/16 1.75
2 1/2 1 5/8 4 1/16 3 2.50
3 1 3/4 4 13/16 3 11/16 4.00
3 1/2 1 7/8 5 5/8 4 5.50
4 2 6 4 3/4 6.30
5 2 1/4 7 1/16 5 9/16 10.25
6 2 3/8 8 1/2 6 11/16 12.00
8 2 3/4 10 3/8 8 11/16 23.00
10 3 1/16 12 11/16 10 13/16 36.00
12 3 3/8 14 7/8 12 13/16 59.00
14 3 1/2 16 1/8 14 1/16 66.00
16 3 11/16 18 1/4 16 1/16 75.00
18 3 13/16 20 1/2 18 1/16 97.00
20 4 22 1/2 20 118.00
24 4 9/16 27 1/8 24 3/16 220.00
26 4 11/16 29 1/16 26 1/4 265.00
30 5 3/8 34 1/16 30 7/16 430.00
36 5 3/8 34 1/16 36 1/2 900.00