Weldolet - Reducing and Flat, ANSI Sch XS, FCS (in)

Written by Matt Milbury on . Posted in O'let Datasheets

Weldolet- Reducing and Flat, ANSI Sch XS, FCS Datasheet

  • Dimensions and tolerances in accordance with ANSI/ASME B16.9, ANSI/ASME B16.25 and MSS SP-97.
  • Specifications for carbon steel forgings in accordance with ASTM A105.
  • This is a buttweld connection used for making 90 degree branching from the main run of pipe.
  • Flat weldolets are used on welding caps, elliptical heads and flat surfaces.
  • Each outlet size is available to fit any run curvature.
  • Outlet combinations 6" and less fit a number of run pipe sizes, and fittings are marked accordingly.
  • For dimension L2, see center of run to face of fitting.

data 3 wol red L1data 3 wol red L2data 1 wol

 

Outlet Size (NPS)ABCApprox. Weight (lb)
1/8 5/8 1 5/8 0.10
1/4 5/8 1 5/8 0.10
3/8 3/4 1 1/4 3/4 0.15
1/2 3/4 1 3/8 15/16 0.20
3/4 7/8 1 3/4 1 3/16 0.30
1 1 1/16 2 1/8 1 7/16 0.50
1 1/4 1 1/4 2 9/16 1 3/4 0.90
1 1/2 1 5/16 2 7/8 2 1.10
2 1 1/2 3 1/2 2 9/16 1.75
2 1/2 1 5/8 4 1/16 3 2.60
3 1 3/4 4 13/16 3 11/16 4.10
3 1/2 1 7/8 5 3/8 4 5.60
4 2 6 4 3/4 6.40
5 2 1/4 7 1/16 5 9/16 10.40
6 3 1/16 8 7/8 6 11/16 23.00
8 3 7/8 11 1/2 8 11/16 37.00
10 3 11/16 12 3/4 10 7/16 46.00
12 4 1/16 14 15/16 12 1/2 61.00
14 3 15/16 17 13 13/16 70.00
16 4 3/16 18 3/8 15 7/8 102.00
18 4 3/8 20 3/8 17 15/16 130.00
20 4 11/16 22 15/16 20 1/16 158.00
24 5 1/2 27 7/8 24 3/16 290.00
26 5 3/4 30 1/8 27 1/4 350.00