Weldolet - Size to Size and Flat, ANSI Sch XS, FCS (in)

on . Posted in O'let Datasheets

  • Dimensions and tolerances in accordance with ANSI/ASME B16.9, ANSI/ASME B16.25 and MSS SP-97.
  • Specifications for carbon steel forgings in accordance with ASTM A105.
  • This is a buttweld connection used for making 90 degree branching from the main run of pipe.
  • Flat Weldolets are used on welding caps, elliptical heads and flat surfaces.
  • Each outlet size is available to fit any run curvature.
  • Outlet sizes 6" and less fit a number of run pipe sizes, and fittings are marked accordingly.
  • For dimension L2, see center of run to face of fitting.

data 1 wol sch std L1 L2 L3data 1 wol sch std L1data 1 wol

Outlet Size (NPS)ABCDApprox. Weight (lb)
1/2 3/4 1 3/8 15/16 5/8 0.15
3/4 7/8 1 5/8 1 3/16 13/16 0.25
1 1 1/16 2 1 7/16 1 1/32 0.40
1 1/4 1 1/4 2 7/16 1 3/4 1 3/8 0.70
1 1/2 1 5/16 2 7/8 2 1 5/8 0.90
2 1 1/2 3 1/2 2 9/16 2 1/16 1.60
2 1/2 1 5/8 4 1/16 3 2 7/16 2.50
3 1 3/4 4 13/16 3 11/16 3 1/16 4.10
3 1/2 2 5 3/8 3 7/8 3 9/16 5.10
4 2 6 4 3/4 4 7.50
5 2 1/4 7 1/8 5 9/16 5 1/16 9.50
6 3 1/16 8 7/8 6 11/16 6 1/16 15.00
8 3 7/8 10 5/8 8 11/16 7 5/8 32.00
10 3 1/2 12 7/8 10 7/16 9 3/4 46.00
12 3 15/16 15 3/16 13 11 3/4 61.00
14 4 1/8 16 11/16 14 5/16 13 75.00
16 4 7/16 18 7/8 16 1/2 15 115.00
18 4 11/16 21 1/8 18 5/8 17 130.00
20 5 23 3/8 20 13/16 19 187.00
24 5 1/2 27 7/8 25 1/8 23 316.00
26 5 3/4 30 1/8 27 1/4 25 370.00