Bolt - Bleed Ring, ANSI Class 150-2500 (in)

Written by Matt Milbury. Posted in Flange Bolt Datasheets

Bolt - for Bleed Ring, ANSI Classes 150 to 2500, 1/16" and 1/4" Raised Face and Flat Face (in) Datasheet

  • Stud bolts in accordance with ANSI/ASME B16.5.
  • A stud is threaded either on both ends or the full length of the stud.
  • Studs both have American National Course Threads.
  • Length of stud bolts do not include the height of the point.
  • Length of stud bolts when used with lap joint flanges will depend upon the thickness of the lap joint stub end.
  • ANSI 150 Lb. and 300 Lb. weld neck flange has a 1/16 inch raised face.
  • ANSI 600 Lb. to 2500 Lb. weld neck flange has a 1/4 inch raised face.

Data bolt stud bleed ringData bolt stud

Pipe Size

(NPS)

Class 150Class 300Class 600Class 900Class 1500Class 2500
#

of Bolts

Bolt

Diameter

Length

of StudBolt

#

of Bolts

Bolt

Diameter

Length

of StudBolt

#

of Bolts

Bolt

Diameter

Length

of StudBolt

#

of Bolts

Bolt

Diameter

Length

of StudBolt

#

of Bolts

Bolt

Diameter

Length

of StudBolt

#

of Bolts

Bolt

Diameter

Length

of StudBolt

1/2 - - - - - - - - - - - - - - - - - -
3/4 - - - - - - - - - - - - - - - - - -
1 4 1/2 4 1/4 4 5/8 4 3/4 4 5/8 5 1/4 4 7/8 6 3/4 4 7/8 6 3/4 4 7/8 7 1/4
1 1/4 4 1/2 4 1/2 4 5/8 5 4 5/8 5 1/2 4 7/8 6 3/4 4 7/8 6 3/4 4 1 7 3/4
1 1/2 4 1/2 4 1/2 4 3/4 5 1/4 4 3/4 6 4 1 7 1/4 4 1 7 1/4 4 1 1/8 8 1/2
2 4 5/8 5 8 5/8 5 1/4 8 5/8 6 8 7/8 7 1/2 8 7/8 7 1/2 8 1 8 3/4
2 1/2 4 5/8 5 1/4 8 3/4 5 3/4 8 3/4 6 1/2 8 1 8 8 1 8 8 1 1/8 9 1/2
3 4 5/8 5 1/4 8 3/4 6 8 3/4 6 3/4 8 7/8 7 1/2 8 1 1/8 8 3/4 8 1 1/4 10 1/2
3 1/2 8 5/8 5 1/4 8 3/4 6 8 7/8 7 1/4 - - - - - - - - -
4 8 5/8 5 1/4 8 3/4 6 1/4 8 7/8 7 1/2 8 1 1/8 8 1/2 8 1 1/4 9 1/2 8 1 1/2 11 3/4
5 8 3/4 5 1/2 8 3/4 6 1/2 8 1 8 1/4 8 1 1/4 9 1/4 8 1 1/2 11 1/2 8 1 3/4 13 1/2
6 8 3/4 5 3/4 12 3/4 6 1/2 12 1 8 1/2 12 1 1/8 9 1/4 12 1 3/8 12 8 2 15 1/4
8 8 3/4 6 12 7/8 7 1/4 12 1 1/8 9 1/4 12 1 3/8 10 1/2 12 1 5/8 13 1/4 12 2 16 3/4
10 12 7/8 6 1/4 16 1 8 16 1 1/4 10 1/4 16 1 3/8 11 12 1 7/8 15 12 2 1/2 21
12 12 7/8 6 1/2 16 1 1/8 8 1/2 20 1 1/4 10 1/2 20 1 3/8 11 3/4 16 2 16 1/2 12 2 3/4 23
14 12 1 7 20 1 1/8 8 3/4 20 1 3/8 11 20 1 1/2 12 1/2 16 2 1/4 17 3/4 - - -
16 16 1 7 20 1 1/4 9 1/4 20 1 1/2 11 3/4 20 1 5/8 13 16 2 1/2 19 1/4 - - -
18 16 1 1/8 7 1/2 24 1 1/4 9 1/2 20 1 5/8 12 1/2 20 1 7/8 14 1/2 16 2 3/4 21 - - -
20 20 1 1/8 8 24 1 1/4 9 3/4 24 1 5/8 13 20 2 15 1/2 16 3 23 - - -
22 - - - - - - - - - - - - - - - - - -
24 20 1 1/4 8 1/2 24 1 1/2 10 3/4 24 1 7/8 14 3/4 20 2 1/2 19 16 3 1/2 26 - - -