Gasket - Spiral Wound, for ANSI Class 400, B16.47, Series A (in)

Gasket - Spiral Wound, for ANSI Class 400, B16.47, Series A (in) Dimensions to ASME B16.20 - Metallic Gaskets for Pipe Flanges: Ring-Joint, Spiral-Wound, and Jacketed Inner rings are recommended for all graphite filled gaskets, required for all PTFE filled gaskets. The gasket outside diameter tolerance for NPS 26" through NPS 60" is ±0.06". The gasket inside diameter tolerance for NPS 26" through NPS 34" is ±0.03"; for NPS 36" through NPS 60" is ±0.05". The centering ring outside diameter tolerance is ±0.03".
Pipe Size (NPS)	Inner Ring Inside Diameter A	Sealing Element Inside Diameter B	Sealing Element Outside Diameter C	Outer Ring Outside Diameter D
26	26.00	27.00	29.00	32.75
28	28.00	29.00	31.00	35.13
30	29.75	31.25	33.25	37.25
32	32.00	33.50	35.50	39.50
34	34.00	35.50	37.50	41.50
36	36.13	37.63	39.63	44.00
38	37.50	38.25	40.25	42.25
40	39.38	40.38	42.38	44.38
42	41.38	42.38	44.38	46.38
44	43.50	44.50	46.50	48.50
46	46.00	47.00	49.00	50.75
48	47.50	49.00	51.00	53.00
50	49.50	51.00	53.00	55.25
52	51.50	53.00	55.00	57.25
54	53.25	55.25	57.25	59.75
56	55.25	57.25	59.25	61.75
58	57.25	59.25	61.25	63.75
60	59.75	61.75	63.75	66.25