Pipe - FBRGL, Epoxy, ANSI Sch 30 (in)

Written by Matt Milbury on . Posted in Pipe & Tubing Dimensional Datasheets

Pipe - FBRGL, Epoxy, ANSI Sch 30 (in) Datasheet

  • Pipe dimensional data and pressure ratings from –50° to 275°F.
  • Pipe dimensional data - All values are nominal. Minimum wall thickness shall not be less than 87.5% of nominal wall thickness in accordance with ANSI/ASTM D2996.
  • Pressure ratings - Static pressure rating; steady (stationary) pressure is created when using a gear pump, turbine pump, centrifugal pump, etc.
  • Vacuum pressure - A full vacuum within the pipe is equivalent to 14.7 psi external pressure at sea level.
  • ASTM D2996 - Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

Data fbrgl pipe 1

Pipe Size

(NPS)

Inside Diameter

(in)

Outside Diameter

(in)

Nominal Liner Thickness

 (in)

Nominal Reinf. Thickness

(in)

Nominal UV Thickness

(in)

Total Thickness

(in)

Internal Pressure

(psi)

Vacuum Pressure

(psi)

3 3.00 3.34 0.060 0.090 0.020 0.170 250 52.8
4 4.00 4.34 0.060 0.090 0.020 0.170 250 24.1
6 6.00 6.38 0.060 0.110 0.020 0.190 175 13.8
8 8.00 8.38 0.060 0.110 0.020 0.190 150 6.1
10 10.00 10.49 0.060 0.165 0.020 0.245 150 10.2
12 12.25 12.74 0.060 0.165 0.020 0.245 125 5.7
14 14.25 14.78 0.060 0.165 0.040 0.265 100 3.6
16 16.25 16.78 0.060 0.165 0.040 0.265 100 2.5
18 18.25 18.85 0.060 0.220 0.020 0.300 100 4.2
20 20.25 20.85 0.060 0.220 0.020 0.300 100 3.1
24 24.25 24.96 0.060 0.275 0.020 0.355 100 3.5
30 30.50 31.32 0.060 0.330 0.020 0.410 100 3.1