Pipe - HDPE, ANSI DR 7.0, IPS (in)

Written by Matt Milbury. Posted in Pipe & Tubing Dimensional Datasheets

HDPE, ANSI DR 7.0, 335 psi, Pipe Iron Pipe Size (in) Datasheet

  • ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
  • ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
  • HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
  • HDPE = High-density Polyethylene

data hdpe pipe 1

Pipe Size

(in)

Outside Diameter

(in)

Minimum Wall

(in)

Average Inside Diameter

(in)

Approx. Weight

(lbs/ft)

1 1/4 1.660 0.237 1.158 0.46
1 1/2 1.900 0.271 1.325 0.61
2 2.375 0.339 1.656 0.95
3 3.500 0.500 2.440 2.06
4 4.500 0.643 3.137 3.40
6 6.625 0.946 4.619 7.37
8 8.625 1.232 6.013 12.50
10 10.750 1.536 7.494 19.42
12 12.750 1.821 8.889 27.31
14 14.000 2.000 9.760 32.93
16 16.000 2.286 11.154 43.01
18 18.000 2.571 12.549 54.43
20 20.000 2.857 13.943 67.20
22 22.000 3.143 15.337 81.32
24 24.000 3.429 16.731 96.77
26 26.000 - - -
28 28.000 - - -
30 30.000 - - -
32 32.000 - - -
34 34.000 - - -
36 36.000 - - -
42 42.000 - - -
48 48.000 - - -
54 54.000 - - -