Restrained Anchored Pipe Stress

on . Posted in Pipe

Restrained or anchored pipe stress refers to the internal forces and deformations that occur within a pipe system when it is constrained or supported in a way that restricts its movement.  In engineering, pipes are often subjected to various types of loading, including pressure, thermal expansion, and external forces.  When a pipe is not allowed to move freely due to its connection to other structures or components, the resulting internal forces and deformations can lead to stresses that need to be carefully analyzed and managed.

There are two primary types of restraints for pipes

  • Anchored  -  An anchored restraint prevents both axial and lateral movement of the pipe.  The pipe is effectively fixed at the anchor points, and this can result in significant internal stresses if the pipe expands or contracts due to temperature changes or other factors.
  • Restrained  -  A restrained restraint allows axial movement of the pipe but restricts lateral movement.  This type of restraint allows the pipe to expand and contract longitudinally, but it cannot move sideways.  This can also lead to stresses as the pipe tries to adjust to temperature changes or pressure fluctuations.

restrained or anchored pipe stress involves considering factors such as

  • Pipe material properties  -  Different materials have different coefficients of thermal expansion and mechanical properties that affect how they respond to changes in temperature and pressure.
  • Operating conditions  -  Fluctuations in pressure, temperature, and flow rates that the pipe experiences during its operation.
  • Support and restraint locations  -  The locations and types of supports and restraints, which can vary the way the pipe deforms and redistributes stresses.
  • Thermal expansion or contraction  -  Temperature changes cause pipes to expand or contract.  If not properly accounted for, these changes can lead to excessive stresses.
  • External forces  -  Forces acting on the pipe system, such as loads from adjacent structures or equipment, seismic loads, and wind loads.

Engineers use various techniques to simulate the behavior of restrained or anchored pipe systems.  The goal is to ensure that the resulting stresses are within acceptable limits to prevent issues such as pipe failure, leakage, or structural damage.  Proper design and analysis are essential to ensure the safety and reliability of pipe systems in various industries, including oil and gas, petrochemicals, water distribution, and more.

 

Restrained Anchored Pipe Stress formula

\( S = \lambda \; \alpha \; \Delta T  \)   (Restrained Anchored Pipe Stress)

\( \lambda =  S \;/\; \alpha \; \Delta T  \) 

\( \alpha =  S \;/\; \lambda \; \Delta T  \) 

\( \Delta T =  S \;/\; \lambda \; \alpha  \) 

Solve for S

elastic modulus, λ
thermal expansion coefficient, α
temperature change, ΔT

Solve for λ

stress temperature change, S
thermal expansion coefficient, α
temperature change, ΔT

Solve for α

stress temperature change, S
elastic modulus, λ
temperature change, ΔT

Solve for ΔT

stress temperature change, S
elastic modulus, λ
thermal expansion coefficient, α

Symbol English Metric
\( S \) = stress temperature change  \(F\) \(C\) 
\( \lambda \) (Greek symbol lambda) = short term elastic modulus \(lbf \;/\; in^2\) \(Pa\)
\( \alpha \) = (Greek symbol alpha) thermal expansion coefficient \(in \;/\; in\;F\) \(mm \;/\; mm\;C\)
\( \Delta T \) = temperature change \(F\) \(C\)

 

Piping Designer Logo Slide 1

Tags: Thermal Strain and Stress Pipe Support Compression and Expansion