Flanged Bends - AWWA C110, DI (in)

on . Posted in Ductile Iron Flanged Fitting Datasheets

  • For flange dimensions see Flange - ANSI Class 125, C110, DI
  • AWWA C110/A21.10 - Ductile-Iron and Gray-Iron Fittings (3" to 48")
  • AWWA C104/A21.4 - Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • ASME B16.1 - Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • All ductile iron flanged fittings shall be rated for water pressure of 250 PSI.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.

data 90 flg di 1

Ductile Iron 90° BendDuctile Iron 90° BendDuctile Iron 45° BendDuctile Iron 45° BendDuctile Iron 22-1/5° BendDuctile Iron 22-1/5° BendDuctile Iron 11-1/4° BendDuctile Iron 11-1/4° Bend

 

 

 

 

 

 

 

 

Pipe Size90° Bend45° Bend22 1/2° Bend11 1/4° Bend
RAApprox. Weight (lb.)RBApprox. Weight (lb.)RBApprox. Weight (lb.)RBApprox. Weight (lb.)
2 3.00 4 1/2 14 - - - - - - - - -
3 4.00 5 1/2 26 3.62 3 20 7.56 3 22 15.25 3 20
4 4.50 6 1/2 45 4.81 4 36 10.06 4 35 20.21 4 40
6 6.00 8 70 7.25 5 60 15.06 5 65 30.50 5 55
8 7.00 9 115 8.44 5 1/2 105 17.62 5 1/2 90 35.50 5 1/2 90
10 9.00 11 165 10.88 6 1/2 130 22.65 6 1/2 130 45.69 6 1/2 130
12 10.00 12 235 13.25 7 1/2 195 27.67 7 1/2 195 55.81 7 1/2 195
14 11.50 14 330 12.06 7 1/2 245 25.12 7 1/2 250 50.75 7 1/2 245
16 12.50 15 480 13.25 8 315 27.62 8 315 55.81 8 315
18 14.00 16 1/2 525 14.50 8 1/2 425 30.19 8 1/2 405 60.94 8 1/2 385
20 15.50 18 880 16.88 9 1/2 485 35.19 9 1/2 505 71.06 9 1/2 505
24 18.50 22 1085 18.12 11 730 37.69 11 530 76.12 11 760
30 21.50 25 1755 27.75 15 1355 57.81 15 1385 116.75 15 1395
36 24.50 28 2135 35.00 18 1755 72.88 18 1790 147.25 18 1805
42 27.50 31 3055 42.25 21 2600 88.00 21 2665 177.69 21 2680
48 30.50 34 4095 49.50 24 3580 103.06 24 3665 208.12 24 3695