Pipe - HDPE, ANSI DR 17.0, 125 PSI, DIPS (in)

Pipe - HDPE, ANSI DR 17.0, 125 PSI, DIPS (in) ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. HDPE = High-density Polyethylene
Pipe Size (NPS)	Outside Diameter (DIPS)	Minimum Wall (in)	Average Inside Diameter (in)	Approx. Weight (lbs/ft)
4	4.800	0.282	4.202	1.76
6	6.900	0.406	6.039	3.64
8	9.050	0.532	7.922	6.26
10	11.100	0.653	9.716	9.42
12	13.200	0.776	11.555	13.31
14	15.300	0.900	13.392	17.89
16	17.400	1.024	15.229	23.15
18	19.500	1.147	17.068	29.07
20	21.600	1.271	18.905	35.68
24	25.800	1.518	22.582	50.89
30	32.000	1.882	28.010	78.26
36	38.300	2.253	33.524	112.13
42	44.500	2.618	38.950	151.39