Pipe - HDPE, ANSI DR 13.5, 160 PSI, DIPS (in)

Pipe - HDPE, ANSI DR 13.5, 160 PSI, DIPS (in) ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. HDPE = High-density Polyethylene
Pipe Size (NPS)	Outside Diameter (DIPS)	Minimum Wall (in)	Average Inside Diameter (in)	Approx. Weight (lbs/ft)
4	4.800	0.356	4.045	2.18
6	6.900	0.511	5.817	4.50
8	9.050	0.670	7.630	7.75
10	11.100	0.822	9.357	11.66
12	13.200	0.978	11.127	16.48
14	15.300	1.133	12.898	22.15
16	17.400	1.289	14.667	28.64
18	19.500	1.444	16.439	35.97
20	21.600	1.600	18.208	44.14
24	25.800	1.911	21.749	62.97
30	32.000	2.370	26.976	96.87
36	38.300	2.837	32.286	138.77
42	44.500	3.296	37.512	187.33