Pipe - HDPE, ANSI DR 11.0, 200 PSI, IPS (in)

Pipe - HDPE, ANSI DR 11.0, 200 PSI, IPS (in) ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. HDPE = High-density Polyethylene
Pipe Size (NPS)	Outside Diameter (IPS)	Minimum Wall (in)	Average Inside Diameter (in)	Approx. Weight (lbs/ft)
1 1/4	1.660	0.151	1.340	0.31
1 1/2	1.900	0.173	1.533	0.41
2	2.375	0.216	1.917	0.64
3	3.500	0.318	2.826	1.39
4	4.500	0.409	3.633	2.31
6	6.625	0.602	5.349	5.00
8	8.625	0.784	6.963	8.47
10	10.750	0.977	8.679	13.16
12	12.750	1.159	10.293	18.51
14	14.000	1.273	11.301	22.32
16	16.000	1.455	12.915	29.15
18	18.000	1.636	14.532	36.89
20	20.000	1.818	16.146	45.54
22	22.000	2.000	17.760	55.10
24	24.000	2.182	19.374	65.58
26	26.000	2.364	20.988	76.96
28	28.000	2.545	22.605	89.26
30	30.000	2.727	24.219	102.47
32	32.000	2.909	25.833	116.58
34	34.000	3.091	27.447	131.61
36	36.000	3.273	29.061	147.55
42	42.000	3.818	33.906	200.84
48	48.000	-	-	-
54	54.000	-	-	-