Pipe - HDPE, ANSI DR 11.0, 200 PSI, DIPS (in)

Pipe - HDPE, ANSI DR 11.0, 200 PSI, DIPS (in) ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. HDPE = High-density Polyethylene
Pipe Size (in)	Outside Diameter (in)	Minimum Wall (in)	Average Inside Diameter (in)	Approx. Weight (lbs/ft)
4	4.800	0.436	3.876	2.62
6	6.900	0.627	5.571	5.42
8	9.050	0.823	7.305	9.32
10	11.100	1.009	8.961	14.03
12	13.200	1.200	10.656	19.84
14	15.300	1.391	12.351	26.65
16	17.400	1.582	14.046	34.47
18	19.500	1.773	15.741	43.29
20	21.600	1.964	17.436	53.12
24	25.800	2.345	20.829	75.78
30	32.000	2.909	25.833	116.58
36	38.300	3.482	30.918	167.01
42	44.500	-	-	-