Pipe - HDPE, ANSI DR 26.0, 80 PSI, IPS (in)

Pipe - HDPE, ANSI DR 26.0, 80 PSI, IPS (in) ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. HDPE = High-density Polyethylene
Pipe Size (in)	Outside Diameter (in)	Minimum Wall (in)	Average Inside Diameter (in)	Approx. Weight (lbs/ft)
1 1/4	1.660	-	-	-
1 1/2	1.900	-	-	-
2	2.375	-	-	-
3	3.500	-	-	-
4	4.500	-	-	-
6	6.625	0.255	6.084	2.24
8	8.625	0.332	7.921	3.80
10	10.750	0.413	9.874	5.91
12	12.750	0.490	11.711	8.31
14	14.000	0.538	12.859	10.02
16	16.000	0.615	14.696	13.09
18	18.000	0.692	16.533	16.57
20	20.000	0.769	18.370	20.45
22	22.000	0.846	20.206	24.75
24	24.000	0.923	22.043	29.45
26	26.000	1.000	23.880	34.57
28	28.000	1.077	25.717	40.09
30	30.000	1.154	27.554	46.02
32	32.000	1.231	29.390	52.36
34	34.000	1.308	31.227	59.11
36	36.000	1.385	33.064	66.27
42	42.000	1.615	38.576	90.20
48	48.000	1.846	44.086	117.81
54	54.000	2.077	49.597	149.10