Pipe - HDPE, ANSI DR 26.0, 80 PSI, DIPS (in)

Pipe - HDPE, ANSI DR 26.0, 80 PSI, DIPS (in) ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. HDPE = High-density Polyethylene
Pipe Size (NPS)	Outside Diameter (DIPS)	Minimum Wall (in)	Average Inside Diameter (in)	Approx. Weight (lbs/ft)
4	4.800	-	-	-
6	6.900	0.265	6.338	2.43
8	9.050	0.348	8.312	4.19
10	11.100	0.427	10.195	6.30
12	13.200	0.508	12.123	8.91
14	15.300	0.588	14.053	11.96
16	17.400	0.669	15.982	15.48
18	19.500	0.750	17.910	19.44
20	21.600	0.831	19.838	23.86
24	25.800	0.992	23.697	34.03
30	32.000	1.231	29.390	52.37
36	38.300	1.473	35.177	75.00
42	44.500	1.712	40.871	101.28