Braking Distance

on . Posted in Civil Engineering

stopping distance 1Breaking distance, abbreviated as \(B_d\), is the distance a vehicle travels from the moment the brakes are fully applied until the vehicle comes to a complete stop.  It is a critical factor in understanding the overall stopping distance of a vehicle and is influenced by various factors, including vehicle speed, road conditions, vehicle weight, braking system efficiency, and tire grip.  Braking distance consists of two main components: the initial portion where the vehicle is decelerating, and the latter portion where the vehicle is at a lower speed and is gradually coming to a stop.

Braking Distance Index

Factors that influence Braking Distance

  • Speed  -  Braking distance increases significantly with higher initial speeds.  A vehicle traveling at a higher speed will require more distance to come to a complete stop.
  • Deceleration  -  The braking capability of a vehicle depends on its braking system, tire grip, and road conditions.  A higher deceleration (stronger braking) reduces braking distance.
  • Road Conditions  -  Wet, icy, or slippery road surfaces reduce tire grip and increase braking distance.
  • Tire Condition  -  Worn or improperly inflated tires can affect braking efficiency and increase braking distance.
  • Vehicle Weight  -  Heavier vehicles have more kinetic energy at a given speed, which requires more energy to stop, leading to a longer braking distance.
  • Brake System  -  The condition and effectiveness of a vehicle's brake system impact the braking performance and subsequently the braking distance.

It's important to note that braking distance is only one component of the overall stopping distance.  The total stopping distance includes both the braking distance and the brake reaction distance, which is the distance traveled while the driver reacts to a hazard and initiates braking.  Taking into account both components is crucial for ensuring safe driving and collision avoidance.  Drivers should maintain a safe following distance from the vehicle in front of them to allow for sufficient Braking Distance, especially in adverse weather conditions or when driving at higher speeds.

 

Braking Distance formula

\( B_d = 1.075 \; ( V^2  \;/\; a ) \)

\( V = \sqrt{ B_d \; a \;/\; 1.075  } \)

\( a = V^2 \;  1.075 \;/\; B_d  \)

Symbol English Metric
\( B_d \) = braking distance \(ft\)  \(m\) 
\( V \) = design speed \( mm \) \(m \;/\; s\)
\( a \) = deceleration rate \( mm \) \(m \;/\; s\)

   

AASHTO Exhibit 3-1 Stopping Sight Distance

Brake reaction distance predicated on a time of 2.5 s; deceleration.  Rate of 11.2 \(ft/s^2\) used to determine calculated sight distance.

Design Speed
Design Speed Distance
Braking Distance on Level Stopping Sight Distance
Calculated Design
15 55.1 21.6 76.7 80
 20  73..5  38.4  111.9  115
25 91.9  60.0  151.9 155
30 110.3  86.4 196.7 200
35 128.6  117.6  246.2 250
40 147.0  153.6 300.6 305
45 165.4  194.4  359.8 360
 50  183.8  240.0 423.8  425
55 202.1  290.3 492.4 495
60 220.5  345.5 566.0 570
65 238.9  4.505 644.4 645
70 257.3  470.3 727.6 730
75 275.6  539.9 815.5 820
80 294.0  614.3 908.3 910

 

P D Logo 1 

Tags: Transportation Surveying