Print

Flange Drawing Packages

on . Posted in Flange Drawings

Flanges in this category are split up as a single flange and a flange pair. 

All flange packages are $5.99 each.

Single flanges have multiple views, side and end views.  These would be useful when doing end of line work or for plot plan or section drawings.

Double flanges have end views only.  They include two flanges with a gasket inserted between them.  These are already spaced to include the width of the gasket. 

Example of the Type of Blocks

ANSI 150 Weld Neck Flange Drawing Example36.01 KB

PD Flange WNF b16.5 150ANSI 150 Weld Neck Flanges

 

Drawings

 Weld Neck Flanges
 Single Flange (Inches)Flange Pair (Inches)
ANSI 150 Weld Neck Flange - ANSI 150 Weld Neck Flange Pair - ANSI 150
ANSI 300 Weld Neck Flange - ANSI 300 Weld Neck Flange Pair - ANSI 300
ANSI 400 Weld Neck Flange - ANSI 400 Weld Neck Flange Pair - ANSI 400
ANSI 600 Weld Neck Flange - ANSI 600 Weld Neck Flange Pair - ANSI 600
ANSI 900 Weld Neck Flange - ANSI 900 Weld Neck Flange Pair - ANSI 900
ANSI 1500 Weld Neck Flange - ANSI 1500 Weld Neck Flange Pair - ANSI 1500
ANSI 2500 Weld Neck Flange - ANSI 2500 Weld Neck Flange Pair - ANSI 2500

Notes for All Drawings

Each drawing package has been created on 'Layer 0' and can be either copied into your working drawing or can be copied into your pallettes. The drawing is saved as a .dwg file and includes four different views:

  • Fange Face View, 1" - 20"
  • Weld End View, 1" - 20"
  • Side View - Double Line, 1" - 20"
  • Side View - Single Line, 1" - 12"

Drawing file will work  in the following formats:

  • AutoCAD 2013/ LT2013
  • AutoCAD 2010/ LT2010
  • AutoCAD 2004/ LT2004