Flanged Bends - Reducing, AWWA C110, DI (in)

Written by Matt Milbury on . Posted in Ductile Iron Flanged Fitting Datasheets

Flanged bends - Reducing, AWWA C110, DI datasheet

  • Flanged reducing bend fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange - ANSI Class 125, C110, DI
  • AWWA C110/A21.10 - Ductile-Iron and Gray-Iron Fittings (3" to 48")
  • AWWA C104/A21.4 - Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • ASME B16.1 - Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • All ductile iron flanged fittings shall be rated for water pressure of 250 PSI.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.

data 90 flg didata 90 flg di 1

 

SizeHApprox. Weight (lb)
4 x 3 6 1/2 35
6 x 4 8 65
8 x 4 9 90
8 x 6 9 100
10 x 6 11 125
10 x 8 10 150
12 x 6 12 175
12 x 8 12 190
12 x 10 12 220
14 x 6 14 230
14 x 8 14 240