Weldolet - Reducing and Flat, ANSI Sch XS, FCS (in)

Weldolet - Reducing and Flat, ANSI Sch XS, FCS (in) Dimensions and tolerances in accordance with ANSI/ASME B16.9, ANSI/ASME B16.25 and MSS SP-97. Specifications for carbon steel forgings in accordance with ASTM A105. This is a buttweld connection used for making 90 degree branching from the main run of pipe. Flat weldolets are used on welding caps, elliptical heads and flat surfaces. Each outlet size is available to fit any run curvature. Outlet combinations 6" and less fit a number of run pipe sizes, and fittings are marked accordingly. For dimension L2, see center of run to face of fitting.
Outlet Size (NPS)	A	B	C	Approx. Weight (lb)
1/8	5/8	1	5/8	0.10
1/4	5/8	1	5/8	0.10
3/8	3/4	1 1/4	3/4	0.15
1/2	3/4	1 3/8	15/16	0.20
3/4	7/8	1 3/4	1 3/16	0.30
1	1 1/16	2 1/8	1 7/16	0.50
1 1/4	1 1/4	2 9/16	1 3/4	0.90
1 1/2	1 5/16	2 7/8	2	1.10
2	1 1/2	3 1/2	2 9/16	1.75
2 1/2	1 5/8	4 1/16	3	2.60
3	1 3/4	4 13/16	3 11/16	4.10
3 1/2	1 7/8	5 3/8	4	5.60
4	2	6	4 3/4	6.40
5	2 1/4	7 1/16	5 9/16	10.40
6	3 1/16	8 7/8	6 11/16	23.00
8	3 7/8	11 1/2	8 11/16	37.00
10	3 11/16	12 3/4	10 7/16	46.00
12	4 1/16	14 15/16	12 1/2	61.00
14	3 15/16	17	13 13/16	70.00
16	4 3/16	18 3/8	15 7/8	102.00
18	4 3/8	20 3/8	17 15/16	130.00
20	4 11/16	22 15/16	20 1/16	158.00
24	5 1/2	27 7/8	24 3/16	290.00
26	5 3/4	30 1/8	27 1/4	350.00