Pipe - HDPE, ANSI DR 11.0, 200 PSI, IPS (in)

on . Posted in Pipe & Tubing Datasheets

  • ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
  • ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
  • HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
  • HDPE = High-density Polyethylene

 

Pipe - HDPE, ANSI DR 11.0, 200 PSI, IPS (in)

Pipe Size

(NPS)

Outside Diameter

(IPS)

Minimum Wall

(in)

Average Inside Diameter

(in)

Approx. Weight

(lbs/ft)

1 1/4 1.660 0.151 1.340 0.31
1 1/2 1.900 0.173 1.533 0.41
2 2.375 0.216 1.917 0.64
3 3.500 0.318 2.826 1.39
4 4.500 0.409 3.633 2.31
6 6.625 0.602 5.349 5.00
8 8.625 0.784 6.963 8.47
10 10.750 0.977 8.679 13.16
12 12.750 1.159 10.293 18.51
14 14.000 1.273 11.301 22.32
16 16.000 1.455 12.915 29.15
18 18.000 1.636 14.532 36.89
20 20.000 1.818 16.146 45.54
22 22.000 2.000 17.760 55.10
24 24.000 2.182 19.374 65.58
26 26.000 2.364 20.988 76.96
28 28.000 2.545 22.605 89.26
30 30.000 2.727 24.219 102.47
32 32.000 2.909 25.833 116.58
34 34.000 3.091 27.447 131.61
36 36.000 3.273 29.061 147.55
42 42.000 3.818 33.906 200.84
48 48.000 - - -
54 54.000 - - -

 

Piping Designer Logo 1