Extension Cords
Home
Engineering
Management & Systems
Safety
Extension Cords
Extension cords are designed and should only be for temporary use. All other electrical connections will be perminant and by code.
If a cord is damaged, it shall be replaced or shortened by an electrician. Never patch with electrical tape.
Cords shall be protected against contact with chemicals, hot surfaces, or oil.
Cords shall never be hung over nails or other sharp edges or placed where vehicles can run over them.
Similar Articles
MOD_TAGS_SIMILAR_NO_MATCHING_TAGS
Latest Articles
DC Motor Armature Torque
DC Motor Armature Power
Back EMF
DC Motor Armature Voltage
Gasket Minimum Required Bolt Load