Mechanical Joint Tapped Tees - Full Body, AWWA C110, DI (in) | |||
|---|---|---|---|
| Pipe Size | Dimension (in) | Approx. Weight (lb) | |
| H | Max. Tap | ||
| 3 | 8 | 2 | 40 |
| 4 | 8 | 2 | 50 |
| 6 | 8 | 2 | 75 |
| 8 | 8 | 2 | 105 |
| 10 | 8 | 2 | 130 |
| 12 | 8 | 2 | 180 |
MJ x MJAWWA C110/A21.10 - Ductile-Iron and Gray-Iron Fittings (3" to 48")- ASME B16.1 - Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
- AWWA C104/A21.4 - Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
- AWWA C111/A21.11 - Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
- Ductile iron mechanical joint fittings 3" through 24" shall be rated for 350 PSI working pressure.
- Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
- MJ - mechanical joint
