Flanged Flares - AWWA C110, DI (in)

Flange & Flare 90 Elbow

Flanged Flares - AWWA C110, DI (in) Flanged flare fittings are not included in AWWA C110/A21.10 For flange dimensions see Flange - ANSI Class 125, C110, DI AWWA C110/A21.10 - Ductile-Iron and Gray-Iron Fittings (3" to 48") AWWA C104/A21.4 - Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water ASME B16.1 - Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125) All ductile iron flanged fittings shall be rated for water pressure of 250 PSI. Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
Flange and Flare 90° Elbow
Run Size	M	N	P	Approx. Weight (lb)
3	7.5	5.5	8.5	25
4	9	6.5	9.5	40
6	11	8	12	75
8	13.5	9	13	110
10	16	11	15	170
12	19	12	16	255
14	21	14	22	450
16	23.5	15	23	545
18	25	16.5	24.5	675
20	27.5	18	26	860
24	32	22	30	1195
30	38.8	25	38	2070
36	48	28	38	2900

Flange & Flare

Flanged Flares - AWWA C110, DI (in) Flanged flare fittings are not included in AWWA C110/A21.10 For flange dimensions see Flange - ANSI Class 125, C110, DI AWWA C110/A21.10 - Ductile-Iron and Gray-Iron Fittings (3" to 48") AWWA C104/A21.4 - Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water ASME B16.1 - Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125) All ductile iron flanged fittings shall be rated for water pressure of 250 PSI. Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
Flange and Flare Piece
Run Size	R	S	Approx. Weight (lb)
3	7.25	8	20
4	9	8	30
6	11	8	45
8	13.5	10	75
10	16	10	115
12	19	12	155
14	21	16	225
16	23.5	16	330
18	25	16	355
20	27.5	18	465
24	32	18	600
30	38.75	24	900
36	46	24	1200