Mechanical Joint 11 1/4 Bends - Full Body, AWWA C110, DI (in)
- For flange dimensions see Flange - ANSI Class 125, C110, DI
- AWWA C110/A21.10 - Ductile-Iron and Gray-Iron Fittings (3" to 48")
- ASME B16.1 - Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
- AWWA C104/A21.4 - Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
- AWWA C111/A21.11 - Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
- Ductile iron mechanical joint fittings 3" through 24" shall be rated for 350 PSI working pressure.
- Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
- MJ - mechanical joint
- PE - plain end
- FLG - flange
Pipe Size | Dimension (in) | Approx. Weight (lb) | ||||
---|---|---|---|---|---|---|
R | C | D | MJ x MJ | MJ x PE | MJ x FLG | |
3 | 15.25 | 3.0 | 11.0 | 30 | - | - |
4 | 20.31 | 4.0 | 12.0 | 52 | - | - |
6 | 30.50 | 5.0 | 13.0 | 65 | 71 | - |
8 | 35.50 | 5.5 | 13.5 | 104 | 105 | - |
10 | 45.69 | 6.5 | 14.5 | 171 | - | - |
12 | 55.81 | 7.5 | 15.5 | 221 | 215 | - |
14 | 50.75 | 7.5 | 15.5 | 305 | - | - |
16 | 55.81 | 8.0 | 16.0 | 391 | 367 | - |
18 | 60.94 | 8.5 | 16.5 | 525 | 422 | - |
20 | 71.06 | 9.5 | 17.5 | 605 | - | - |
24 | 76.12 | 11.0 | 19.0 | 996 | 800 | 972 |
30 | 116.75 | 15.0 | 23.0 | 1410 | - | 1305 |
36 | 147.25 | 18.0 | 26.0 | 2397 | - | 2185 |
42 | 177.69 | 21.0 | - | 3035 | - | - |
48 | 208.12 | 24.0 | - | 4190 | - | - |