Pipe - HDPE, ANSI DR 21.0, 100 PSI, IPS (in)

on . Posted in Pipe & Tubing Datasheets

  • ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
  • ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
  • HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
  • HDPE = High-density Polyethylene

 

Pipe - HDPE, ANSI DR 21.0, 100 PSI, IPS (in)

Pipe Size

(in)

Outside Diameter

(in)

Minimum Wall

(in)

Average Inside Diameter

(in)

Approx. Weight

(lbs/ft)

1 1/4 1.660 - - -
1 1/2 1.900 - - -
2 2.375 - - -
3 3.500 - - -
4 4.500 0.214 4.046 1.27
6 6.625 0.315 5.957 2.75
8 8.625 0.411 7.754 4.66
10 10.750 0.512 9.665 7.24
12 12.750 0.607 11.463 10.19
14 14.000 0.667 12.586 12.28
16 16.000 0.762 14.385 16.04
18 18.000 0.857 16.183 20.30
20 20.000 0.952 17.982 25.07
22 22.000 1.048 19.778 30.33
24 24.000 1.143 21.577 36.10
26 26.000 1.238 23.375 42.36
28 28.000 1.333 25.174 49.13
30 30.000 1.429 26.971 56.40
32 32.000 1.524 28.769 64.17
34 34.000 1.619 30.568 72.44
36 36.000 1.714 32.366 81.21
42 42.000 2.000 37.760 110.54
48 48.000 2.286 43.154 144.38
54 54.000 2.571 48.549 182.73

 

Piping Designer Logo 1