Geotechnical Engineering Standards

ASTM Standards

• ASTM C1242 - Standard Guide for Selection, Design, and Unstallation of Dimension Stone Attachment Systems
• ASTM D559 - Standard Test Method for Wetting and Drying Compacted Soil-Cement Mixtures
• ASTM D560 - Standard Test Method for Freezing and Thawing Compacted Soil-Cement Mixtures
• ASTM D806 - Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
• ASTM D806 - Standard Guide for Selection of Dimension Stone
• ASTM D2434 - Standard Testing Method for Permeability of Granular Soils (Constant Head)
• ASTM D2487 - Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
• ASTM D2488 - Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)
• ASTM D3282 - Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
• ASTM D3966 - Standard Testing Methods for Deep Foundations Under Lateral Load
• ASTM D4380 - Standard Test Method for Determining Density of Construction Slurries
• ASTM D4435 - Standard Test Method for Rock Bolt Anchor Pull Test
• ASTM D4525 - Standard Test Method for Permeability of Rocks by Flowing Air
• ASTM D4611 - Standard Test Method for Specific Heat of Rock and Soil
• ASTM D4829 - Standard Test Method for Expansion Index of Soils
• ASTM D4945 - Standard Testing Methods for High Strain Dynamic Testing for Deep Foundations
• ASTM D4992 - Standard Practice for Evaluation of Rock to be Used for Erosion Control
• ASTM D5718 - Standard Guide for Documenting a Groundwater Flow Model Application
• ASTM D5882 - Standard Testing Methods for Low Strain Impact Integrity Testing for Deep Foundations
• ASTM D5889 - Standard Practice for Quality Control of Geosynthetic Clay Layers
• ASTM D6092 - Standard Practice for Specifying Standard Sizes on Stone for Erosion Control
• ASTM D6128 - Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester
• ASTM D6285 - Standard Guide for Locating Abandoned Wells
• ASTM D6393 - Standard Test Method for Bulk Solids Characterization by Carr Indices
• ASTM D6599 - Standard Practice for Construction of Live Fascines on Slopes
• ASTM D6683 - Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
• ASTM D6773 - Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester
• ASTM D6825 - Standard Guide for Placement of Riprap Revetments
• ASTM D6940 - Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
• ASTM D6941 - Standard Practice for Determining Sediment Pond Skimmer Flow Rate
• ASTM D7099 - Standard Terminology Related to Frozen Soil and Rock
• ASTM D7407 - Standard Guide for Determinining the Transmission of Gases through Geomembranes
• ASTM D7765 - Standard Practice for Use of Foundry Sand in Structural Fill and Embankments
• ASTM D8326 - Standard Practice for Measuring of the Kinetic Energy of Simulated Rainfall