Pipe - HDPE, ANSI DR 32.5, 63 PSI, DIPS (in)

on . Posted in Pipe & Tubing Datasheets

      

Pipe - HDPE, ANSI DR 32.5, 63 PSI, DIPS (in)

  • ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
  • ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
  • HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
  • HDPE = High-density Polyethylene
Pipe Size

(NPS)

Outside Diameter

(DIPS)

Minimum Wall

(in)

Average Inside Diameter

(in)

Approx. Weight

(lbs/ft)

4 4.800 - - -
6 6.900 0.212 6.451 1.96
8 9.050 0.278 8.461 3.37
10 11.100 0.342 10.375 5.09
12 13.200 0.406 12.339 7.19
14 15.300 0.471 14.301 9.66
16 17.400 0.535 16.266 12.48
18 19.500 0.600 18.228 15.69
20 21.600 0.665 20.190 19.26
24 25.800 0.794 24.117 27.46
30 32.000 0.985 29.912 42.26
36 38.300 1.178 35.803 60.49
42 44.500 1.369 41.598 81.68

 

Piping Designer Logo 1