Orifice Flange Datasheets

Orifice flanges are for metering the volumetric flow rate of liquids and gasses through a pipe. Two orifice flanges are called an orifice flange union. Each flange comes with two pipe taps for measuring the pressure drop of the flow through an orifice plate. Orifice plates do not come with the flanges and are sized based on the requirements of the process. Two jack screws are used to spread the flanges apart in order to change the orifice plate. This flange is normally available in weld neck, slip-on, and threaded flanges. These flanges have a raised face.

 

Orifice Flange Standards

ASME Standards

  • ASME B16.36 - Orifice Flanges
    • Slip-on Flange: Class 300, Class 400, Class 600, Class 900, Class 1500
    • Threaded Flange: Class 300, Class 400, Class 600, Class 900, Class 1500
    • Weld Neck Flange: Class 300, Class 400, Class 600, Class 900, Class 1500, Class 2500

 

Orifice Flange Sizes - 1" through 24"

Orifice Flanges are not available above ANSI Class 300

Orifice Flange Pair with Orifice Plate

 

Piping Designer Logo 1

Display #
Title
Flange - Orifice, Weld Neck, ANSI Class 1500, B16.36 (in)
Flange - Orifice, Weld Neck, ANSI Class 2500, B16.36 (in)
Flange - Orifice, Weld Neck, ANSI Class 300, B16.36 (in)
Flange - Orifice, Weld Neck, ANSI Class 400, B16.36 (in)
Flange - Orifice, Weld Neck, ANSI Class 600, B16.36 (in)
Flange - Orifice, Weld Neck, ANSI Class 900, B16.36 (in)

Tags: Pipe Flange Datasheets