These flange drawings contain 66 blocks!
Flanges in this category are split up as a single flange and a flange pair.
Most flange packages are $5.99 each. Dynamic Blocks range from $9.99 to $19.99.
Single flanges have multiple views, side and end views. These would be useful when doing end of line work or for plot plan or section drawings.
Double flanges have end views only. They include two flanges with a gasket inserted between them. These are already spaced to include the width of the gasket.
ANSI 150 Weld Neck Flange Drawing Example36.01 KB
ANSI 150 Weld Neck Flanges
| Weld Neck Flanges | |||||
|---|---|---|---|---|---|
| Single Flange (Inches) | Flange Pair (Inches) | Dynamic Blocks (Inches) | |||
| ANSI 150 | Weld Neck Flange - ANSI 150 | Weld Neck Pair - ANSI 150 | Dynamic Block - Weld Neck Flange Pair | Dynamic Block - Weld Neck Flange with Blind | Dynamic Block - Weld Neck Flange End View |
| ANSI 300 | Weld Neck Flange - ANSI 300 | Weld Neck Pair - ANSI 300 | |||
| ANSI 400 | Weld Neck Flange - ANSI 400 | Weld Neck Pair - ANSI 400 | |||
| ANSI 600 | Weld Neck Flange - ANSI 600 | Weld Neck Pair - ANSI 600 | |||
| ANSI 900 | Weld Neck Flange - ANSI 900 | Weld Neck Pair - ANSI 900 | |||
| ANSI 1500 | Weld Neck Flange - ANSI 1500 | Weld Neck Pair - ANSI 1500 | |||
| ANSI 2500 | Weld Neck Flange - ANSI 2500 | Weld Neck Pair - ANSI 2500 | |||
Each drawing package has been created on 'Layer 0' and can be either copied into your working drawing or can be copied into your pallettes. The drawing is saved as a .dwg file and includes four different views:
Drawing file will work in the following formats:
This Drawing Package contains blocks for weld neck flanges, end view. This package includes two different views, one from the face and one from the weld end. This drawing package contains six dynamic blocks. Each dynamic block contains 19 blocks, a mix of single line and double line.
This Drawing Package contains blocks for weld neck flanges that are rated for multiple ANSI Classes. This package includes a flange pair with a gasket between mating flanges. This drawing package contains six dynamic blocks. Each dynamic block contains 19 blocks, a mix of single line and double line.
This Drawing Package contains blocks for weld neck flanges that are rated for multiple ANSI Services. This package includes a flange pair with a gasket between mating flanges. This drawing package contains six dynamic blocks. Each dynamic block contains 19 blocks, a mix of single line and double line.
Flanges in this category are split up as a single flange and a flange pair.
All flange packages are $5.99 each.
Single flanges have multiple views, side and end views. These would be useful when doing end of line work or for plot plan or section drawings.
Double flanges have end views only. They include two flanges with a gasket inserted between them. These are already spaced to include the width of the gasket.
ANSI 150 Weld Neck Flange Drawing Example36.01 KB
ANSI 150 Weld Neck Flanges
| Weld Neck Flanges | ||
|---|---|---|
| Single Flange (Inches) | Flange Pair (Inches) | |
| ANSI 150 | Weld Neck Flange - ANSI 150 | Weld Neck Flange Pair - ANSI 150 |
| ANSI 300 | Weld Neck Flange - ANSI 300 | Weld Neck Flange Pair - ANSI 300 |
| ANSI 400 | Weld Neck Flange - ANSI 400 | Weld Neck Flange Pair - ANSI 400 |
| ANSI 600 | Weld Neck Flange - ANSI 600 | Weld Neck Flange Pair - ANSI 600 |
| ANSI 900 | Weld Neck Flange - ANSI 900 | Weld Neck Flange Pair - ANSI 900 |
| ANSI 1500 | Weld Neck Flange - ANSI 1500 | Weld Neck Flange Pair - ANSI 1500 |
| ANSI 2500 | Weld Neck Flange - ANSI 2500 | Weld Neck Flange Pair - ANSI 2500 |
Each drawing package has been created on 'Layer 0' and can be either copied into your working drawing or can be copied into your pallettes. The drawing is saved as a .dwg file and includes four different views:
Drawing file will work in the following formats:
This Drawing Package contains blocks for weld neck flanges that are rated for ANSI Class 150 Service. This drawing package contains 64 blocks!
