## Thermodynamics

Thermodynamics is both a branch of physics and an engineering science that deals with large scale reactions of a system that can be observed and measures and the relationship between properties such as energy, heat, pressure, temperaturework, etc. on a system.  A physicist is generally intrested in understanding the fundamentals of physics like matter and the laws of thermodynamics.  An engineer is generally intrested in the energy system and its surroundings.  Thermodynamics is mostly based on four universal laws found in the laws of thermodynamics.

There are three thermodynamic systems, open, closed and isolated:

• Open system freely exchanges energy and matter with its surroundings.
• Closed system exchanges only energy with its surroundings, not matter.
• Isolated system keeps the energy and matter within the system and everything else out.  No transfer in or out.

### Science Branches

Science
Natural Science
Physical Science
Physics
Classical Physics
Mechanical Physics
Thermodynamics

## Thermodynamics Glossary

### A

• Adiabatic process  -  The system should be treated as perfectly insulated so there is no heat transfer in or out of the system.  In this process energy is transfered outside the system only by work.
• Amagat's law  -  States that the volume of a mixture is equal to the sum of the partial volume of its components.
• Antoine equation  -  The relationship between vapor pressure and the temperature of pure substances.
• Atmospheric air  -  The air in the atmosphere, which normally contains some water vapor.

### C

• Celsius  -  A unit of temperature most commonly used through out the world.
• Chemical energy  -  Is when two substances are combined or mixed together (atoms and molecules interacting) to produce a chemical reaction.
• Closed system  -  Exchanges only energy with its surroundings, not matter.
• Combustion  -  A reaction called rapid oxidation or burning produced with the right combination of a fuel, oxygen, and heat.
• Combustion efficiency  -  The amoount of heat released during combustion divided by the heating value of the fuel.
• Complete combustion  -  A combustion process in which all the carbon in the fuel burns to $$CO_2$$, all the hydrogen burns to $$H_2O$$, and all the sulfure (if any) burns to $$SO_2$$.
• Compression ratio  -  The ratio of the maximum volume to the minimum volume in a cylinder.
• Compressor  -  A device that forces air or gas into a smaller area increasing the volume and creating a usable force of energy.
• Condensation  -  A physical change of a substance from a gas phase to a liquid phase.  The molecules are fast moving and far apare.
• Condenser  -  An outdoor part of the AC or heat pump that releases or collects heat.
• Conductor  -  A material through which heat passes.
• Critical point  -  The point at which the saturated liquid and saturated vapor states are identical.
• Critical pressure  -  The pressure of substance at the critical point.
• Critical properties  -  The properties of a fluid at a location where Mach number is unity.
• Critical ratio  -  The ratio of the stagnation to static properties when the Mach number is unity.
• Critical temperature  -  The temperature of substance at the critical point.
• Critical volume  -  The volume of substance at the critical point.

### D

• Dead state  -  When a system is in thermodynamic equilibrium with the envitonment.
• Deficiency of air  -  When the amount of air is less than the stoichiometer amount.
• Density  -  The ratio of the amount of matter in an object compared to its volume.
• Deposition  -  A physical change of a substance from a gas phase to a solid phase and does not pass through the transitional liquid phase.  This is exactly the opposite of sublimation.
• Dry air  -  Air that contains no water vapor.
• Dry steam  -  Does not contain water held in suspension.  It is similar to superheated steam.
• Dynamic temperature  -  The kinetic energy per unit mass divided by the constant pressure specific heat and corresponds to the temperature rise during the stagnation process.

### E

• Efficiency  -  Is expressed in percentage and always less than 100%.
• Elastic modulus  -  See Young's modulus
• Emissivity  -  The surface depends on the material effectiveness in emitting energy as thermal radiation and varies between 0.0 and 1.0.

• Enthalpy  -  Measures the sum of internal energy changes in heat under constant pressure of the system.
• Enthalpy of combustion  - The enthropy of reaction during a steady-flow combustion process when 1 kmol (or 1 kg) of fuel is burned completely at a specific preasure and temperature and represents the amount of heat released.
• Enthalpy departure  -  The difference between the enthalpy of a real gas and the enthalpy of the gas at an ideal state and it represents the variation of the enthalpy of a gas with pressure at a fixed temperatiure.
• Enthalpy departure factor  -  The difference between the entropy of a real gas at a given pressure and temperature and the entropy of the gas at an ideal gas state at the same pressure and temperature.
• Enthalpy of formation  -  The enthalpy of a substance at a specific state due to its chemical composition.
• Enthalpy of reaction  -  The difference between the enthalpy of the products at a specific state and the enthalpy of the reactants at the same state for a complete reaction.
• Entropy  -  Measures the unavailable energy in a heat system.
• Entropy change of a closed system  -  The entropy transfer accompanting heat transfer and the entropy generation within the system boundaries.
• Equilibrium  -  In a equilibrium state there are no unbalanced potentials, or driving forces within the system.

### F

• Fahrenheit  -  A unit of temperature used in the United States and a few other countries.
• Fire point  -  Lowest temperature at which a combusible fluid will burst into flame in the presence of an foreign ignition source.
• First law of thermodynamics  -  The total amount of energy in the universe is constant and that it can neither be created or destroyed.
• Flash point  -  The temperature at which combustion is initiated.
• Fouling  -  Accumulation of unwanted deposits on heat transfer surfaces.  This creates an additional barrier for heat movement, reduces heat transfer efficiency.
• Freezing  -  A physical change of a substance from a liquid phase to a solid phase.

### G

• Gas  -  Able to be compressed to fit a confined space and expanded when released.
• Gas compressibility factor  -  A factor independent of the quantity of gas and determined by the character of the gas, the temperature, and pressure.
• Gauge pressure  -  the difference between the absolute pressure and the local atmospheric pressure.
• Geothermal heat pump  -  Uses the ground as the heat source.

### H

• Heat  -  A form of energy that causes physical change in what is being heated.  The lack of heat is cold.
• Heat-driven system  -  Refrigerator systems whose energy input is based on heat transfer from an external source.
• Heat exchanger  -  A device used to transer heat from one medium to another at different temperatures.  The heat transfer can be air or a liquid such as water or oil.
• Heat flux  -  The heat flow rate transfer through a given surface, per unit surface.
• Heat transfer  -  The exertion of power that is created by heat, or the increase in temperature.  It is the transfer of heat from one system to another.  There are four ways to transfer heat: conduction, convection, mixing, and radiation.
• Heat transfer by conduction  -  It is the flow of energy between two objects, or within one object, where there is a temperature differential.
• Heat transfer by convection  -  Energy transferred by random molecular motion as well as energy transferred by the bulk motion of the fluid.
• Heat transfer rate  -  The amount of hear transfered per unit of time per fluid or material.
• Henry's law  -  One of the gas laws, at a constant temperature, the volume of a gas which will dissolve into a solution is directly porportional to the partial pressure of that gas above the solution in equilibrium with the liquid.

### I

• Ideal gas  -  Defined as one in which all collisions between atoms or molecules are perfectly elastic and in which there are no intermolecular attractive forces.
• Ideal gas law  -  Used to predict pressure, temperature & volume changes in ideal gasses.
• Ignition temperature  -  The minimum temperature to which a fuel must be brought to start the combustion.
• Inert gas  -  A gas which does not normally combine chemically with the base metal or filler metal.
• Internal energy  -  The total of all energies associated with the motion of the molecules in the system.
• Isolated system  -  Keeps the energy and matter within the system and everything else out.  No transfer in or out.

### K

• Kelvin  -  A unit of temperature normally used for scientific calculations.
• Kinetic energy  -  The energy in moving objects or mass.  If it moves, it has kinetic energy.

### L

• Latent energy  -  The internal energy associated with the phase of a system.
• Latent heat  -  The energy absorbed or released by a substance during a constant temperature or phase change from a solid to liquid, liquid to gas or vise versa.
• Linear thermal expansion  -  A porportional change in the origional length and change in temperature due to the heating or cooling of an object.

### M

• Mass fraction  -  The ratio of the mass of one component in a mixture to the total mass of the minture.
• Matter  -  When you look around, everything you see or may not see in the universe is made up of matter.  If it has a mass and takes up space, it is matter.
• Melting point  -  A solid is the temperature at which it changes state from solid to liquid.
• Newton's law of cooling  -  The law states that the rate of heat loss of a body is directly porportional to the difference in the temperature between the body and its surrounding provided the temperature difference is small and the nature of radiating surface remains the same.

• Modulus of elasticity  -  See Young's modulus
• Molecular weight  -  The average mass of one molecule of a substance, 1⁄12 (0.083) the mass of carbon 12 atom.

### N

O

• Open system  -  Freely exchanges energy and matter with its surroundings.
• Open, Closed, and Isolated Systems  -  A thermodynamics system is a specific quanity of matter with a defined boundary and everything outside the boundary is the surroundings.  The system boundary can either be stationary or moving.  There are three types of thermodynamics systems: open, closed, and isolated.

### R

• Radiant heat  -  Heat communicated by radiation and transmitted by electromagnetic waves.
• Rankine  -  Aunit of temperature used in the US engineering field. 0 is set at absolute zero.

### S

• Saturated vapor  -  A vapor at a temperature of the boiling point on the verge of condensing.
• Second law of thermodynamics  -  States that heat cannot pass from a cold body to a hot one by a self-acting process without the help of an external influence.
• Sensible heat  -  The heat added to a substance which increases its temperature but not the phase.
• Shrinkage  -  The contraction in volume as a liquid or metal cools or freezes from its normal temperature.
• Solubility  -  The maximum amount of solid that can be dissolved in a liquid at a specific temperature.
• Specific enthalpy  -  The enthalpy per unit mass.  It is also the total specific internal energy in a system and the product of pressure and specific volume.
• Specific heat  -  The amount of heat required to raise the temperature of a material 1 degree.
• Specific heat capacity  -  The amount of energy required to increase the temperature of the substance by 1°C.
• Steam  -  The invisible vapor (gas) when water is heated to its boiling point and passes from a liquid to a gaseous state.
• Steam density  -  Has a higher density than water vapor, the higher the pressure the higher the steam density.
• Steam flow regimes  -  Because steam can behave as a liquid and as a gas and everything inbetween, the way steam flows through a pipe can change through long straight runs.
• Steam quality  -  The porportion of saturated steam (vapor) in a saturated condensate (liquid) / steam (vapor) mixture.
• Steam users  -  Steam is used for many things in piping design.  In the oil and gas industry, steam is used to heat production tanks, keep flow lines from freezing and to increase oil production in formations that are very viscious.
• Sublimation  -  A physical change of a substance from a solid phase to a gas phase and does not pass through the transitional liquid phase.
• Superheated vapor  -  When vapor has absorbed more heat than is needed to vaporize.  It will not condense when small amounts of heat is removed.

### T

• Temperature  -  The amount of heat or cold, but it is neither heat or cold.  Temperature is expressed as a number that is related to energy and porportional to a type of energy, but it is not energy.
• Temperature differential  -  The difference between two specific temperature points of a volume at a given time in a system.
• Thermal  -  Caused by the change in temperature.
• Thermal analysis  -  A method of studying transformations in metal by measuring the temperature at which thermal arrests occure.
• Thermal contraction  -  The decrease in a linear dimension and volume of a material with a change of temperature.
• Thermal cracking  -  A fluid degradation that occurs when a fluid  is heated above the maximum bulk temperature.  Consequently, the fluid's viscosity, flash point, fire point and auto-ignition temperature reduce significantly.
• Thermal efficiency  -  The fraction of heat that is converted to work or desired output divided by required input.
• Thermal energy  -  The exertion of power that is created by heat, or the increase in temperature.
• Thermal expansion coefficient  -  The percentage change in the length of the material per degree of temperature change, heated solid or liquid.
• Thermal fatique  -  Failure resulting from rapid cycles of alternating heating and cooling.
• Thermal insulation  -  Any material that is used as a barrier to heat transfer.
• Thermal insulator  -  Does not conduct heat readily and is used for either heat conservation or personnel protection.
• Thermal resistance  -  Measures the temperature difference by which an object or material resists a heat flow.

• Thermal stability  -  The ability of a fluid to resist degradation under high-temperature operating conditions.
• Thermal stress  -  Results from non uniform distribution of temperature.
• Total energy  -  The sum of numerous forms of energy such as chemical, electrical, magnetic, mechanical, nuclear, potential, thermal, and etc.

### W

• Waste heat  -  Energy that must be dissipated to the atmosphere from a process such as the heat transfer from condensing steam in the condenser of a system power plant.
• Work  -  The overcoming of resistance through space and is the measure of force x distance.

### Z

• Zeroth law of thermodynamics  -  When two thermal systems are in equilibrium and they with a third, then all are equal to each other, meaning  $$A=B$$  and  $$B=C$$  then  $$A=C$$

Display #
Title
Volumetric Thermal Expansion Coefficient
Wet Steam
Wet Steam Dryness Fraction
Wet Steam Enthalpy
Wet Steam Entropy