Skip to main content

Fastener Datasheets

Fastener, Fastener Datasheets, Datasheets

Fastener DatasheetsFastener is a type of hardware component used to mechanically join two or more objects together.  Fasteners are typically used to create a non-permanent joint that can be easily disassembled or reassembled, such as in the case of screws, bolts, nuts, rivets, and clips.

Fastener 

 

 

Fastener Datasheets

Bolt TypeNut TypeScrew TypeThreaded TypeWasher Type

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Piping Designer Logo 1

Title
Acme Standard Threads (in)
ANSI Thread Series Designations
Bolt - Carriage, Fin Neck, ANSI (in)
Bolt - Carriage, Ribbed Neck, ANSI (in)
Bolt - Carriage, Short Neck, ANSI (in)
Bolt - Hex Heavy, ANSI (in)
Bolt - Square, ANSI (in)
Bolt Head Uses Wrench Size (in)
Bolt Head Uses Wrench Size (mm)
Bolt Threads per Inch (in)
Common Thread Accronyms
Hex Finished Coupling Nut (in)
Hex Finished Nut (in)
Hex Flange Nut (in)
Hex Heavy Coupling Nut (in)
Hex Heavy Jam Nut (in)
Hex Heavy Nut (in)
Hex High Crown Cap Nut (in)
Hex Low Crown Cap Nut (in)
Hex Machine Screw Nut (in)
Hex Slotted Castle Nut (in)
Hex Slotted Heavy Nut (in)
Hex Slotted Nut (in)
Metric - Coarse Screw Thread (mm)
Metric Fine Screw Thread (mm)
Nut - Hex Finished Jam, (in)
Ogee Washer (in)
Pipe Threads per Inch (in)
Round Plate Flat Washer (in)
SAE Flat Washer (in)
Screw - Slotted Flat Cap, ANSI (in)
Slotted Flat Cap Screw (in)
Square Heavy Nut (in)
Square Machine Screw Nut (in)
Square Nut (in)
Standard Flat Washer (in)
Tap Drill for Machine Screws (in)
UNC/UNRC - Coarse Thread (in)
UNEF/UNREF - Extra Fine Thread (in)
UNF/UNRF - Fine Thread (in)
Unified National Standard
Unified Screw Threads Tap Drill (in)
Unified Standard Series Thread (in)
USS Flat Washer (in)
Whitworth's Standard Screw Threads for Bolts (in)
Whitworth's Standard Threads for Pipes (in)
Wood Screw Pilot Hole Sizes (in)