Valve - Ball, Reduced Port, ANSI Class 300, CS (in)

on . Posted in Ball Valve Datasheets

  • Dimensions and tolerances in accordance with ANSI/ASME B16.5 for sizes 1/2" to 24".
  • Face to face dimensions per ANSI/ASME B16.10.
  • Gaskets dimensions and tolerances in accordance with ANSI/ASME B16.20.
  • Preparation of buttweld end in accordance with ANSI/ASME B16.25.
  • Valve dimensions and tolerances in accordance with ANSI/ASME B16.34.
  • Valve weight, open height and handwheel diameter are approximate and vary between manufacture's. Contact manufacturer for specific information.
  • Pressure Temperature Rating:
    • Carbon Steel
    • ASTM A216 Grade WCB
    • 285 psi @ -20°F to 100°F

 data flg ball valvedata flg ball valve 1

Valve Size

(in)

Face to Face Dimension (in)Approx. Handle (in)Approx. Weight (lb)
Raised Face

A

Buttweld

A

Ring Joint

A

Height

A1

Length

A2

Raised Face

 

Buttweld

 

Ring Joint

 

1/2 - - - - - - - -
3/4 - - - - - - - -
1 - - - - - - - -
1 1/2 - - - - - - - -
2 8 1/2 8 1/2 - 6 11 60 - -
2 1/2 - - - - - - - -
3 11 1/8 11 1/8 - 8 24 75 - 75
4 12 12 - 11 51 150 - 250
6 15 7/8 15 7/8 - * * 270 - 270
8 19 3/4 20 1/2 - * * 540 - 540
10 22 3/8 22 - * * 710 - 710
12 25 1/2 25 - * * 1370 - 1370
14 30 30 - * * 2405 - 2405
16 33 33 - * * 2230 - 2230
18 36 - - * * 2550 - -
20 39 - - * * 4335 - -
24 45 - - * * 5830 - -
  • * Manual gear actuators for 6" and above normally come with reduced port.