- See Article - Beam Design Formulas
Diagram Symbols
Bending moment diagram (BMD) - Used to determine the bending moment at a given point of a structural element. The diagram can help determine the type, size, and material of a member in a structure so that a given set of loads can be supported without structural failure.
Free body diagram (FBD) - Used to visualize the applied forces, moments, and resulting reactions on a structure in a given condition.
Shear force diagram (SFD) - Used to determine the shear force at a given point of a structural element. The diagram can help determine the type, size, and material of a member in a structure so that a given set of loads can be supported without structural failure.
Uniformly distributed load (UDL) - A load that is distributed evenly across the entire length of the support area.
Two Span Continuous Beam - Equal Spans, Concentrated Load at Center of One Span formulas |
||
|
\( R_1 \;=\; V_1 \;=\; \dfrac{ 13\cdot P }{ 32 } \) \( R_2 \;=\; V_2 + V_3 \;=\; \dfrac{ 11\cdot P }{ 16 } \) \( R_3 \;=\; V_3 \;=\; \dfrac{ 3\cdot P }{ 32 } \) \( V_2 \;=\; \dfrac{ 19\cdot P }{ 32 } \) \( M_{max} \; (at \;point \;of \;load ) \;=\; \dfrac{ 13\cdot P \cdot L }{ 64 } \) \( M_{max} \; (at \;support \; R_2 ) \;=\; \dfrac{ 3\cdot P \cdot L }{ 32 } \) \( \Delta_{max} \; ( 0.408\;L \; from \;R_1) \;=\; 0.015 \cdot \dfrac{ P \cdot L^3 }{ \lambda \cdot I } \) |
||
| Symbol | English | Metric |
| \( \Delta \) = deflection or deformation | \(in\) | \(mm\) |
| \( M \) = maximum bending moment | \(lbf-in\) | \(N-mm\) |
| \( V \) = maximum shear force | \(lbf\) | \(N\) |
| \( \lambda \) (Greek symbol lambda) = modulus of elasticity | \(lbf\;/\;in^2\) | \(Pa\) |
| \( I \) = second moment of area (moment of inertia) | \(in^4\) | \(mm^4\) |
| \( R \) = reaction load at bearing point | \(lbf\) | \(N\) |
| \( L \) = span length under consideration | \(in\) | \(mm\) |
| \( P \) = total concentrated load | \(lbf\) | \(N\) |
