Reservoir Engineering

An oil and gas reservoir is a subsurface pool of hydrocarbons contained in porous or fractured rock formations.  These reservoirs are typically composed of a porous rock such as sandstone or limestone that has the ability to hold significant amounts of oil and/or natural gas within its pore spaces or fractures.   Oil and gas is extracted from these reservoirs through drilling wells and then processing the extracted fluids to separate the oil, gas, and water.  The efficiency of extraction depends on the characteristics of the reservoir rock, the properties of the hydrocarbons, and the technology used in the extraction process.

Science Branches

Science
Applied Science
Engineering
Mechanical Engineering

Reservoir Classification

Oil and gas reservoirs are classified based on several criteria, including the nature of the hydrocarbons they contain, the geological formations, and the types of traps that contain them.

Based on Hydrocarbon Type

Oil Reservoirs

  • Light Oil Reservoirs  -  Contain light crude oil with a high API gravity and low viscosity.
  • Heavy Oil Reservoirs  -  Contain heavy crude oil with a low API gravity and high viscosity.
  • Extra Heavy Oil Reservoirs  -  Contain even more viscous oil that is more challenging to extract.

Gas Reservoirs

  • Dry Gas Reservoirs  -  Contain primarily methane with little to no condensate.
  • Wet Gas Reservoirs  -  Contain significant amounts of condensates like propane and butane along with methane.
  • Condensate Reservoirs  -  Produce natural gas along with significant amounts of liquid hydrocarbons.

Combination Reservoirs

  • Oil and Gas Reservoirs  -  Contain both oil and gas, often with a gas cap above the oil due to the difference in density.

Based on Geological Structure

Structural Traps

  • Anticlines  -  Upward-arching folds in rock layers.
  • Fault Traps  -  Created by movements along faults that juxtapose permeable and impermeable rocks.
  • Salt Domes  -  Formed by the upward movement of salt, which can create traps by deforming surrounding rock layers.

Stratigraphic Traps

  • Unconformities  -  Erosional surfaces that create traps by juxtaposing different rock types.
  • Pinch-Outs  -  Formed where reservoir rocks thin out or "pinch out" against an impermeable barrier.
  • Reefs  -  Ancient carbonate reefs that create traps due to their porous nature.

Based on Reservoir Drive Mechanism

Solution Gas Drive Reservoirs  -  Pressure is maintained by the release of dissolved gas from the oil.
Gas Cap Drive Reservoirs  -  Pressure is maintained by the expansion of a gas cap overlying the oil.
Water Drive Reservoirs  -  Pressure is maintained by the influx of water from adjacent aquifers.
Gravity Drainage Reservoirs  -  Hydrocarbons move downward due to gravity, typically in highly inclined or fractured reservoirs.
Combination Drive Reservoirs  -  Utilize a combination of the above mechanisms.

Based on Fluid Phases

Single-phase Reservoirs  -  Contain only oil or gas.
Multi-phase Reservoirs  -  Contain both oil and gas, often in distinct layers.

Understanding the type of reservoir is needed in determining the appropriate extraction methods and predicting the production behavior of the reservoir.

Piping Designer Logo 1

Display #
Title
Gas Bubble Radius
Gas Cap Ratio
Gas Cap Shrinkage
Gas Condensate Reservoir
Gas in Place

Tags: Mechanical Pressure Soil Petroleum Geotechnical Drilling Reservoir